Diamond disc for High Performance Cured Concrete
Specific disc for professional cutting of cured concrete with or without rebar, as well as abrasive materials.
- 10mm segment height: additional performance compared to 7mm height
- Laser welded segments: perfect bond to steel support
- Last generation diamond: better cutting capacity
- Drag drill
Select one of the available diameters:
- 300/350/400/450/500
Professional, high performance disc.
SAFETY:
-
Check that the disc is correctly placed in the machine: correct direction of rotation, clean and properly tightened flanges
-
Let the machine run empty for approximately one minute before cutting for the first time and check the flatness of the disc
-
Always use the machine's protective casing correctly, as well as the safety elements indicated on the disc: gloves, goggles, helmets,...etc
-
Do not use a flat disc to make curved cuts
-
Check that the machine's revolutions do not exceed the maximum allowed by the disc
-
Make sure you are using the right disc for the material you intend to cut.
-
Manufactured under European standard EN13236
DIMENSIONS:
- Also available with reinforcement segments for very abrasive aggregates.
Diameter 300:
- Height: 10
- Number of segments: 20
- Segment thickness: 3.2
- Plate thickness: 2.2
- Arbor: 25.4
Diameter 350:
- Height: 10
- Number of segments: 24
- Segment thickness: 3.2
- Plate thickness: 2.2
- Arbor: 25.4
Diameter 400:
- Height: 10
- Number of segments: 28
- Segment thickness: 3.6
- Plate thickness: 2.5
- Arbor: 25.4
Diameter 450:
- Height: 10
- Number of segments: 32
- Segment thickness: 4.0
- Plate thickness: 2.8
- Arbor: 25.4
Diameter 500:
- Height: 10
- Number of segments: 36
- Segment thickness: 4.00
- Plate thickness: 2.8
- Arbor: 25.4
- Material
- Mármol