PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser
PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser
PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser
PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser
PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser
PROTECTOR STAIN WATER AND OIL NATURAL EFFECT BELCARE CARE SEAL - Maser

Water and Oil Stain Protector Natural Effect Belcare Care Seal

€34.00
VAT excluded
  • Protector hydro-oleophobic for quartz surfaces Silestone®, Compac® and natural stone: marble, granite, limestone, sandstone and brick.

NATURAL EFFECT, does not alter color on interior and exterior surfaces (UV resistant).

  • Does not alter color, no surface film
  • 1 Liter

Food Safe Certified: suitable for food surfaces.

Product belonging to the Sustainable and Ecological division of Maser. 

 

PROPERTIES

Excellent protection for Quartz countertops, Silestone®, Compac®, facilitates their maintenance and restoration. This protector does not create a surface film and closes the microporosities preventing the entry of liquids into the material. It remains permeable to vapors. The treated surface maintains its natural properties after the application of the protector.

APPLICATION

  1. Apply evenly on dry and clean materials. The presence of water, dust, or dirt may influence the result with respect to the uniformity of the surface.
  2. Spread the product with a brush, sponge, cloth, or with a gun.
  3. Use the correct amount that the material can naturally absorb.
  4. After a few seconds, clean (polish) the surfaces with a clean cloth. Excess can create superficial adhesive films, so it must be removed immediately after application.

Less Absorbent Surface

  • Remove CARE SEAL residues after 1 minute of application with a clean cloth. We suggest repeating this treatment after 10-15 minutes from the first application. On these surfaces, it may rarely have a color enhancement effect.

High Absorption Materials (such as quartzites)

  • After two hours from the application, remove the excess product from the surface with a cloth soaked in a little product. Finally, leave the surface uniform to avoid the formation of residues. The desired effect is achieved 24 hours after treatment. In the case of floors, wait 24 hours before walking on the surface.

IMPORTANT: when treating a surface for the first time, we suggest testing the product on a small hidden part to test the effect. After use, close the can tightly.

Food Safe Certification: Food safety certification according to EU Regulation 1935/2004.

COVERAGE PER LITER

  • 1 Liter - 30 m2 marble or granite
  • 1 Liter - 20-25 m2 limestone and sandstone

These data are purely informative and may differ depending on the porosity and texture of the stone finish, as well as the conditions of the place.

Density

At 25ºC gr/ml: 0.805

Appearance

  • Opalescent liquid

Standard Color

  • Transparent

PACKAGING

  • 1 Liter
  • Child-resistant cap

The product will last at least 1 year under normal conditions between 18-25 ° C, away from heat sources, moisture, and sunlight.

10012746
8436584920298
No reviews

You might also like

Product added to compare.