Hydro-Oleophobic Protector for Granite Belcare Top Seal

APPLICATION

1. Apply evenly on dry and clean materials. The presence of water, dust or dirt, can influence the result with respect to the uniformity of the surface.
2. Spread the product with a brush, sponge, cloth or with a gun. Use the correct amount that the material can naturally absorb
3. After a few seconds, clean (polish) the surfaces with a clean cloth. Excess can create superficial adhesive films, so this excess must be removed immediately after application
4. We suggest repeating this treatment after 10-15 minutes from the first application

• The anti-stain effect will be achieved after 24 hours of treatment
• In case of application on the floor, do not walk on the surface before
• After application, a slight color increase can be obtained depending on the type of stone where the product is applied

On surfaces to be treated for the first time, TEST IN A SMALL HIDDEN PART to test the effect. After use, close the containers tightly sealed.

DURATION

The product will last at least 1 year under normal conditions between 18-25°C, away from heat sources, moisture and sunlight.

SAFETY STANDARDS

It is a chemical product. Read the safety data sheet before use and the rules described on the container label.

CAUTION ON MARBLE SURFACES

It does not protect all stains on marble surfaces. The use of acidic substances such as wine, tomato, lemon, coffee etc, will stain the surface, due to the reaction of the calcium carbonate contained in the marble.

TECHNICAL DATA

• Density: at 25 ° C gr / ml: 0.80
• Appearance: liquid
• Standard color: transparent / opalescent

PERFORMANCE

• With 1 liter it is possible to treat 20-30 m2 of stone. Consumption depends a lot on the porosity of the material.

RESULTS ON SURFACES

• Granite: Very good
• Exotic granite: Very good
• Marble: Moderate
• Limestone / Sandstone; Good
• Terrazzo / agglomerate: Good
• Polished stone: Moderate
• Stone: Good