Consolidating Hydro-Oleophobic Sealer for Friable Porous Surfaces LIMESEALER

Instructions for Use:

• Preparation of the surface: the surface should be dry and clean; any stains, fungi, and various encrustations should be removed, otherwise, they would remain encapsulated and their subsequent removal would be difficult.
• Application: brush, roller brush. Application with a brush is advised where possible as it allows better penetration of the protector, exerting slight pressure to penetrate well into cracks, corners, and cavities. Repeat the application several times, then continuously until the stone is saturated and no longer absorbs product.
• During application and drying, the substrate temperature should be between 10 and 30°C.
• In the case of application on floors with underfloor heating, turn off the heating and let the stone cool completely.

Usage Tips:

• It is recommended to apply the product until the stone is completely saturated, taking care to apply it coat after coat, i.e., without letting the first coat dry and continuing the application.
• On highly absorbent materials, it is advised to apply the product 2/3 times with a 20-minute interval between applications.
• Do not dilute the product with other solvents or water, as the preparation is ready for use.
• The material to be treated must be completely dry.
• Another application method, suitable for small pieces, can be by immersion. It is also possible to use a wet sponge of the product and dab the material.
• Once treated, the stone material must be allowed to dry for at least 24 hours for complete polymerization to occur.
• In the case of treatments on statues, planters, or outdoor decorative items, pay close attention to small gaps.
• Before use, carefully read the recommendations on the label and perform a preliminary test.

Application Surface

Limestone, Sandstone, porous and fragile calcareous stones in general.

Tools for Use

Product Performance

For the protection of marble, limestone, sandstone, with one liter, 10/15 m2 can be treated depending on the type and finish of the material.

Maintenance

For material maintenance, the use of our LEM-3 detergent is recommended. In the case of stone wear, and as required, it is recommended to reapply LIMESEALER.

Safety Measures

In addition to good work practice, please consult the CE safety data sheets and adhere to regulations regarding laws governing safety in workplaces.