Hydro-Oleophobic Protector Enhancer Belcare Forte Color Plus Fcp-2

VERY RECOMMENDED FOR RESTORATION.

PROPERTIES

Soluble base impregnation solution that completely eliminates small crack lines, shadow-imperfections present in granite and natural stone boards. Creates an intense natural surface color and improves the finish without leaving surface residues. The product will not create any type of film, allowing moisture and vapor to escape and is resistant to UV rays.

SAFETY

When using any type of soluble base product, adequate ventilation is recommended during and after application. Use appropriate rubber gloves when necessary and do not smoke, eat or drink during product use. Keep the product tightly closed and out of reach of children. For more information, consult the safety data sheet.

APPLICATIONS

All surfaces to be treated must be completely clean and dry. When restoring a surface or board, it is IMPORTANT to ensure that any existing treatment or wax is removed before applying any other product. When you do not have previous experience with the treatment, it is recommended to test in a small area to verify the suitability of the product on the stone. When necessary, make sure that all surrounding areas and sensitive surfaces to solvents are protected against possible spills.

Apply the product to the stone surface using a roller, brush or cotton cloth. In very porous stones, allow a minimum of 2 to 6 hours to dry to improve the result. In dense stones, allow a minimum of 30 minutes to 2 hours for the product to be absorbed and thus obtain an optimal result. Always remove any excess residue using wire wool or a 3m nylon pad. If you want to achieve a more intense finish, a second coat can be applied, leaving a minimum of 12 to 24 hours between applications, repeating the action of removing any residue.

COVERAGE

Indicative coverage allowing 2 coats and depending on the absorption of the stone or texture of the surface.

?
• High porosity stone (sandstone): Not recommended
?
• Medium porosity (polished stone, limestone): 10 - 20m²
?
• Low porosity (polished stone): 20 - 30m²
?
• Very dense stone: 30 - 40m²
?

RECOMMENDATIONS

For intensive or periodic cleanings that require more effort, it is recommended to use detergent.