Special Solid Black Gloss Enhancer

Instructions for use:

1. The surface to be treated must be clean, dry, and free of dust. Apply a small amount (20-30 grams) to the surface to be polished, and distribute it evenly with a cloth or other applicator suitable for creamy products.
2. Let it dry for about 10 minutes.
3. Then proceed to polishing.

• In the case of manual polishing, it is recommended to use fine steel wool (without soap); for automatic polishing, it is possible to use a low-speed angle grinder (max. 2000 rpm) equipped with a felt disc or headphones on a cloth.
• In the case of low application, polishing is carried out with a rotary machine with steel wool or with the plant polishing machine with a polishing cloth or steel wool. For particularly porous materials, it is advisable to let the product act for a certain period of time, removing the surface part and polishing it with felt or metal shavings.
• Whether using the artisanal system or the industrial procedure, an exceptional shine with perfect splendor will be obtained, even on particularly difficult materials: green and red marbles, as well as on imperfectly polished materials.

Usage tips:

• To facilitate the penetration of the preparation, it is recommended to heat the slab to be treated; this process allows the opening of porosity, deep penetration of the wax, and then an excellent result.

• The longer the wax remains on the surface to be treated, the better the final result will be.

• To delay the drying of the wax, it is recommended to dilute the mixture with turpentine solvent up to 20%.

• In the case of application to the floor, pay attention to the subsequent slipperiness of the surface; the slipperiness will be reduced after a few days and, as a result of periodic washing, it will continue to maintain an excellent luster.

• It is not recommended to apply on synthetic materials such as plastic, linoleum, and laminate.

• Before use, carefully read the label recommendations and perform a preliminary test.

Safety measures:

In addition to good work practices, please consult the CE safety data sheets and comply with the regulations on laws governing safety in the workplace.

Application surface:

Marbles and granites, terrazzo, marble-cement, marble-resin, quartz-resin, limestone.

Tool of use

Product performance

For the polishing of shiny or polished marbles and granites beyond grain 800, 1 kg of product can treat 25/30 m².