Fine grain marble brightener and hardener SUPERCRYSTAL POWDER

Instructions for use:

1. Spread the SUPERCRYSTAL powder manually on the floor, with a circular surface of approximately 2 m2. Place the single-brush machine equipped with a natural fiber disc directly on the powder.
2. Dampen the floor with water using the machine's tank, or use a sprayer. If necessary, add powder or water to the floor. The resulting mixture could spread around the work area, so pay attention to blankets, carpets, walls, furniture, etc. that are nearby and possibly cover them with a plastic film for protection.
3. The working surface should be approximately 1 to 2 m2 at a time. DO NOT LET THE MIXTURE OF WATER AND POWDER DRY ON THE FLOOR FOR ANY REASON.
4. After passing the machine over the 1-2 m2 surface 3-4 times, proceed to dry it with a wet vacuum or rubber squeegee to check the degree of polishing. Once the desired shine is achieved, move on to another area to be treated.
5. Rinse the entire floor to ensure that all dust or mixture residues have been removed from the plant and especially from the joints.
6. If necessary, repeat the treatment until the desired shine is achieved.
7. Rinse the entire floor with clean water with the addition of an alkaline detergent such as ULTRA STRIPPER, let it dry.

Usage tips:

• Be careful when using SUPER CRYSTAL powder, as it could "burn" the marble. Do not overuse the machine on the same portion of the surface for long periods of time.
• The floor machine should have no more than 227 rpm, such as the ns. Phoenix (EH) and 30-45 kg of weight and should be equipped with a natural fiber disc.
• We recommend proceeding step by step for crystallization by treating 1-2 m2 at a time;
• Before use, carefully read the label recommendations and perform a preliminary test.

Safety measures:

In addition to good work practice, please consult the CE safety data sheets and adhere to the regulations on laws governing safety in the workplace.

Application surface:

Marble, granite, terrazzo, agglomerated marble.

Tool of use:

Product performance:

With 1 kg of product, it can polish 40/50 m² of material depending on the wear of the floor.