Ice-Melt Snow and Ice Melter Belcare

Application

Eco-friendly and hygroscopic de-icing concentrate: when ice or snow melt and disappear, a thin layer of our product remains at the base that does not freeze. Therefore, it has a longer effect compared to anti-icing salt, preventing re-freezing.

It is also used to dry damp spaces, as it absorbs moisture from the air.

The moisture absorption effect can also be used to remove dust from the pavement, for example in warehouses.

Winter Use

• Distribute evenly over the surface with protective gloves.
• The amount to be used is about 20gr/m2 for thin layers of ice. And a maximum of approximately 100gr/m2 for thicker layers. To reduce product consumption, it is advisable to first remove as much snow as possible with a shovel.

Moisture Elimination

• Place the product in one or more containers and leave them in the room.
• Keep out of reach of children.
• Change the product in case of moisture saturation in the container.

Do not use the product on fresh reinforced concrete (less than 7 weeks old) or defective.

Technical Data

• Apparent density: approximately 860 gr/lt, therefore: 1 kg corresponds to approximately 1.16Lt of product
• Comparison: normal ice salt has a normal apparent density of 1300gr/lt. 1 Kg of product corresponds to 0.75lt of anti-icing salt. 1 kg of product has a volume of almost 1.5.

Advantages

• Great effectiveness and assured effect, due to autonomous heat development.
• More efficiency and economy in consumption compared to traditional anti-icing salt.
• Long-lasting effect even at -5°C