WET EFFECT HYDRO-OLEOPHOBIC PROTECTOR BELCARE COOL SEAL

APPLICATION:

1. Apply evenly on dry, clean materials. The presence of water, dust or dirty matter can influence the result, with respect to the uniformity of the surface.
2. Spread the product with a brush, sponge, cloth, or pistol.
3. After a few seconds, clean (polish) the surfaces with a clean cloth. Excess can create surface adhesive films, so it should be removed immediately after application.

We suggest repeating this treatment after 20 minutes. The anti-stain effect will be achieved after 24 hours of treatment. In case of application on the ground, do not walk on the surface before.

IMPORTANT: Before the first time, we suggest trying the product in a small hidden part to test the effect. After use, close the can tightly.

The product will last for at least 2 years under normal conditions between 18-25 ° C, away from heat, moisture, and sunlight.

Food Safe Certification: Food safety certification according to EU Regulation 1935/2004.

Density:

• At 25°C g/ml: 1.005

Appearance:

• Opalescent liquid

Standard colour:

• Not colored

COVERAGE PER LITER:

• 1 liter - 40 m2 polished stone
• 1 liter - 20-30 m2 on polished and brushed surfaces with greater porosity

These data are purely informational and may differ depending on the porosity and texture of the stone finish, as well as the conditions of the place.

PACKAGING:

• 1 liter
• Child-proof safety cap