TRANSPARENT LIQUID POLISHING WAX BELCARE FLUID WAX

Very concentrated transparent liquid wax, with high penetration power and fast drying.

To increase the brightness of polished surfaces of natural and Laminate boardd stones:

Onyx, marble, natural stone, granite, Silestone®, COMPAC® ETC

is also used to restore the lost polishing effect.

High penetration power
Ultra fast drying
1 liter

Features

PROPERTIES:

FLUID WAX is the result of the binding of special waxes that are very pure and white, dissolved through solvents that allow a high level of penetration into the treated material that produce a lasting effect.
It has a good result in outdoor conditions.

APPLICATION:

The product should be applied evenly on dry, clean materials. The presence of water, dust or dirt can influence the result with respect to the uniformity of the surface.

When treating a surface for the first time, we suggest testing wax in a small hidden part to test the effect. It depends a lot on the stone.

Extend the product with a sponge or cloth. Apply a uniform amount to the surface
, allow to dry for a few minutes and clean the surfaces thoroughly with a clean cloth. If the wax does not dry, it will not glow after removal. The excess must be removed after application and will have an immediate effect.

The application can increase the enamel from 5-6 to 10-15 gloss points.

The product will last for at least 2 years under normal conditions between 18-25 ° C, away from heat, moisture, and sunlight.

COVERAGE PER LITER:

1 liter: 20-30 m2 Stone
The data are merely informative and may differ depending on the porosity and texture of the stone finish as well as the conditions of the place.