MEX
FR
Tools
Tools
-
SPECIAL CUTTER DEKTON® (COSENTINO® APPROVED) TYROLIT
CNC cutting diamond cutter for DEKTON® and other ceramic materials of different thicknesses.
- Decreases speed by 50% of corner cutting
- Work with the cutter within the parameters
Model Dekton® cutting cutter
Diameter 23mm Length 50mm Forward speed 250mm/min Rotation speed 4800-5500rpm Hooking 1/2"Gas Approved byCOSENTINO
-
REINFORCED CUTTER HEIGHT 61 Ø16 FOR CERAMIC (DEKTON®/NEOLITH®) TYROLIT
Reinforced cut diamond cutter, special for ceramic material such as Dekton® and Neolith®.
- With the reinforced tip for working with it.
Diameter: 16 mm
Length: 61 mm
-
REINFORCED BLUE CUTTING CUTTER HEIGHT 49 GRANITE AND QUARTZ AMINATE BOARD (SILESTONE®/COMPAC®) TYROLIT
Blue cutting cutter, reinforced for granites and quartz Laminate boards such as Silestone® and Compac®.
- Medium Hardness
- High performance for working granites and Laminate boards of
- Quartz with tip reinforcement to work with as well
Same diameter 23mm Length 35mm Ground speed 200-300mm/min. Turning speed 5000-5500rpm hooking 1/2"Gas -
Out of Stock
DRILL FOR TAPS IN CERAMIC TYROLIT
Drill for the drilling of the crack in ceramic products with a thin wall.
Quick tool replacement.
Due to the shape of the diamond ring, it does not leave the witness inside the tool.
Reduces cutting speed by 5% at corners.
Hooking:
- 1/2 GAS
Select one of the available diameters:
20 / 35 / 35
-
CUTTING CUTTER BLUE WITHOUT REINFORCEMENT HEIGHT 49 GRANITE AND QUARTZ AMINATE BOARD (SILESTONE®/COMPAC®) TYROLIT
Blue cutting cutter forgranitesand quartz Laminate boards such asSilestone® and Compac®.
- Medium hardness
- High performance for working granites and quartz Laminate boards
Diameter 23mm Length 49mm Ground speed 200-300mm/min. Rotation speed 5000-5500rpm Hooking 1/2"Gas -
Out of Stock
VACUUM CERAMIC DRILL D8 M14 BELCUT
Vacuum ELECTROPLATED drill, perfect for drilling ceramic materials.
- With wax in the tip
- High strength
- High quality
- designed to offer the best of the workshop solutions
Diameter:
- 8 mm
Hooking
- M14
-
BLUE MILLING CUTTER WITHOUT REINFORCEMENT HEIGHT 35 GRANITE AND QUARTZ AMINATE BOARD (SILESTONE®/COMPAC®) TYROLIT
Blue cutting cutter forgranitesand quartz Laminate boards such asSilestone® and Compac®.
- Medium Hardness
- High performance for working granites and Laminate boards of
Quartz diameter 23mm length 35mm feed speed 200-300mm/min speed Turning 5000-5500rpm Hooking 1/2"Gas -
REINFORCED BLUE MILLING CUTTER HEIGHT 35 GRANITE AND QUARTZ AMINATE BOARD (SILESTONE®/COMPAC®) TYROLIT
Blue cutting cutter, reinforced for granites and quartz Laminate boards such as Silestone® and Compac®.
- Medium hardness
- High performance for working granites and quartz Laminate boards
- With tip reinforcement to also work with the
Diameter 23mm Length 35mm Ground speed 200-300mm/min. Rotation speed 5000-5500rpm Hooking 1/2"Gas -
BLUE MILLING CUTTER WITHOUT REINFORCEMENT HEIGHT 36 GRANITE AND QUARTZ AMINATE BOARD (SILESTONE®/COMPAC®) TYROLIT
Blue cutting cutter forgranitesand quartz Laminate boards such asSilestone® and Compac®.
- Medium Hardness
- High performance for working granites and Laminate boards of
Quartz diameter 23mm length 36mm feed speed 200-300mm/min speed Turning 5000-5500rpm Hooking 1/2"Gas -
REINFORCED MILLING CUTTER HEIGHT 61 Ø18 FOR CERAMIC (DEKTON®/NEOLITH®) TYROLIT
Reinforced cut diamond cutter, especially for ceramic material such as Dekton®, Neolith® and Lapitec®.
- With the reinforced tip for working with it.
Diameter: 16 mm
Length: 61 mm
