NANOTECHNOLOGICAL HARDENER POLISH DURALBRILL

Mode of use: 

1. The surface to be treated must be clean, dry and free of dust.

• On pavements with solvent-based waxes, with very strong resins or acrylic-urethanic bases we advise our ULTRA STRIPPER degreasing cleaner.

1. Spread the product, diluted in 1:5 water, using a damp cloth or cloth evenly. Allow to dry well without walking over.

• Then go on with a single-wheel machine equipped with steel wool disc or animal bristle disc to obtain a bright polishing. After 24 hours, washing is possible.
• The periodic washing is done with a neutral detergent (we advise our detergent LEM3 or L&L).

Usage Tips:

• The longer the product remains on the surface to be treated, the better the end result.
• Dilute DURALBRILL In warm water, the use of pure wax is not recommended, because there is a risk of creating fences in the material.
• Product for internal use. Outdoor application is not recommended as it is not weather resistant.
• Before use, carefully read the recommendations on the label and make a preliminary test.

Application surface: Marble, granite, stoneware and any natural stone, marble-cement, marble-resin.

Usage Tool:

Product Performance: 1 liter of product can be treated from 25 to 100 m² depending on the absorption of the material and the dissolution of the product.

Maintenance: For the maintenance of the material we recommend the use of our detergent LEM-3 or L&L. Once the stone has lost its shine, it is recommended to wax again.

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.