Hydro-Oleophobic Wet Effect Belcare Cool Seal Protector

APPLICATION:

1. Apply evenly on dry and clean materials. The presence of water, dust, or dirty material can influence the result, with respect to the uniformity of the surface.
2. Spread the product with a brush, sponge, cloth, or with a gun.
3. After a few seconds, clean (polish) the surfaces with a clean cloth. Excess can create superficial adhesive films, so it must be removed immediately after application.

We suggest repeating this treatment after 20 minutes. The anti-stain effect will be achieved after 24 hours of treatment. In case of application on the floor, do not walk on the surface before.

IMPORTANT: before the first time, we suggest testing the product in a small hidden part to test the effect. After use, close the can well.

The product will last at least 2 years under normal conditions between 18-25 ° C, away from heat sources, moisture, and sunlight.

Food Safe Certification: Food safety certification according to EU Regulation 1935/2004.

Density:

• At 25ºC gr/ml: 1.005

Appearance:

• Opalescent liquid

Standard Color:

• Uncolored

COVERAGE PER LITER:

• 1 liter - 40 m2 of polished stone
• 1 liter - 20-30 m2 on polished and brushed surfaces with higher porosity

These data are merely informative and may differ depending on the porosity and texture of the stone finish, as well as the conditions of the place.

PACKAGING:

• 1 Liter
• Child-proof safety cap