Extra strong alkaline detergent to remove stains and dirt on stone, ceramic, concrete, cement, terrazzo BELCARE ALK23

Application

Before using BELCARE ALK23, you must read the detailed instructions on the packaging. You can use this alkaline detergent manually with a mop or with a single-disc machine. We advise you to dilute the product in water according to the amount of dirt and/or wax to be removed. If you are going to use it for cleaning a vertical surface, use a brush to remove the dirt. Remember not to use it on materials sensitive to alkali.

• For manual use, you must dilute 50/100 ml (1/2 cup of coffee) of BELCARE ALK23 in a liter of warm water, letting it act for a few minutes. Then, we scrub the floor with a mop or scrubbing brush, rinsing it very well.
• For use with a single-disc machine, you have to dilute 100/150 ml (2/3 cup of coffee) of BELCARE ALK23 in a liter of water, to clean the floor with a green pad or with a scrubbing brush. Remove the residues with a cloth or a wet vacuum cleaner. You must rinse the floor perfectly. For more resistant dirt, increase the concentration as necessary, with a maximum recommended dilution of 500 ml in a liter of water. If you use it on polished marble or marble conglomerates, we advise you to do a preliminary test in a small area.

Safety measures

In addition to good work practices, please consult the CE safety data sheets that you can find below and comply with the regulations on laws governing safety in the workplace.