Engineered Stone Countertop Polish Belcare

Water-based shining product for Engineered Stone surface. It stays away from any multi-purpose product to achieve the best and most suitable result for each type of material. Non-toxic, non-flammable, and non-acidic.

• Spray 500 ml
• Ready to use

This product can be purchased individually in a 500ml format. It can also be acquired in a 200ml format within the Belcare Engineered Stone Countertops Cleaning Kit, which contains everything necessary for anyone to perform the most professional work on the surfaces of your home.

All our products have the FoodSafe seal, which certifies that after using this chemical treatment, it is possible to handle food on the treated surface.

Applications

Before applying it on floors, make sure the surface is clean and dry. Kitchens - Bathrooms - Bars - Fireplaces.

1. Press the spray and apply the special BELCARE shining product
2. Rub the product with a clean microfiber cloth, using circular movements
3. If necessary, repeat the process to achieve optimal results.

Its use is recommended as the last phase of the cleaning process:

1. Apply cleaner
2. Apply restorer
3. Apply shining product

Always test before use. Apply a few drops of the product on the surface and spread the product with a cotton cloth using circular movements until the surface is completely clean. After a few minutes, remove any residue with the clean part of the cotton cloth and continue cleaning to define the shining of the surface

PERFORMANCE:

The consumption per m² of this product cannot be quantified due to the wide variety of types of supports, finishes, and types of material.

SAFETY NOTICE:

Use gloves in case of sensitive skin. Keep the product out of the reach of children. More information available in the safety data sheet.