Liquid Concentrated Marble and Polished Granite Brightening Wax RR1

Instructions for use

The surface to be treated must be clean, dry, and free of dust. For pavements with previous wax build-up, use our ULTRA STRIPPER cleaner. Spread the wax, diluted 1 to 20 in warm water (one dosage cap in 1 liter of water), using a damp cloth or mop. Allow the wax to dry without stepping on it, then vigorously rub with a wool cloth or use a floor polishing machine. Periodic cleaning should be done with our neutral detergent LEM-3. After these washes, the wax can be polished as described above.

Usage tips:

• The longer the wax remains on the surface to be treated, the better the final result will be.
• Dilute the wax in warm water, pure wax is not recommended as it may leave marks on the material.
• If applying to the floor, pay attention to the resulting slippery surface; the slipperiness will decrease after a few days and, as a result of regular washing, will continue to maintain an excellent shine.
• For internal use only.
• Before use, carefully read the recommendations on the label and perform a preliminary test.

Safety measures

In addition to good work practices, please consult the CE safety data sheets and comply with regulations regarding workplace safety laws.

Application surface

Marbles and granites, marble-cement, marble/resin, calcareous stones.

Tools for use

Product performance

For polishing shiny or polished marbles and granites beyond grain 800, one liter of product can treat 150/200 m².