Glass Polisher BELLINZONI VETROGLASS

Instructions for use:

1. Wash the floor (preferably with our LEM-3 Detergent).
2. Where the floors are very damaged and difficult to remove dirt, use our ULTRA-STRIPPER degreaser.
3. Rinse well (there should be no trace of old wax or grease) and let it dry.
4. Apply the product with a sprayer and moisten the surface to be treated (1 to 2 square meters evenly) with VETRO-GLASS.
5. Immediately pass the Phoenix scrubber with steel wool or a White Scotch Brite disc, slowly sliding the machine: this way the crystallizer will dry on the surface, creating the thermochemical crystallization action.
6. If you want to enhance the already excellent shine and protect it, we recommend using our RR/1 Liquid Wax product.

If the floor has problems with marked scratches, before crystallization it is recommended to use FIBRALUX discs or polish with a polisher equipped with DIAZONE diamond discs.

Usage tips:

• After thoroughly washing the floor, let it dry completely to avoid residual moisture.
• In the case of light or white marbles, it is recommended to use a White Scotch Brite disc or "Natural" abrasive disc for crystallization.
• It is recommended to proceed with crystallization gradually, treating 1-2 m2 at a time.
• Make sure that the crystallizer residues or splashes do not remain on the floor; therefore, avoid the product from draining out of the container.
• Before use, carefully read the recommendations on the label and perform a preliminary test.

Safety measures

In addition to good work practices, please consult the CE safety data sheets and comply with regulations regarding laws governing workplace safety.

Application surface:

Marble, compact/agglomerated marbles, travertine, limestone.

Tools for use:

Sprayer, scrubber, abrasive discs, steel wool

Product performance:

For marble crystallization, approximately 80/100 m² can be treated with one liter of product.