Manually spread SUPERCRYSTAL dust on the ground, with a circular surface of approximately 2 m2. Place the single-cup machine equipped with a natural fiber disc, directly on the dust.
Moisten the soil with water using the machine tank, or use a spray. If necessary, add dust or water to the floor. The mixture that emerged could spread around the work area, then pay attention to nearby blankets, carpets, walls, furniture, etc. and possibly cover them with a plastic film to protect them.
The work surface should be approximately 1 to 2 m2 at a time. DO NOT ALLOW THE MIXTURE OF WATER AND DUST TO DRY ON THE GROUND FOR ANY REASON.
After 3-4 times the machine has passed over the 1-2 m2 surface, dry it with a liquid aspirator or rubber brush to check the degree of polishing. Once you reach the desired brightness, move to another area to be treated.
Rinse the entire floor to make sure all dust or mixture has been removed from the plant and above all from leaks.
If necessary, repeat the treatment until the desired brightness is reached.
Rinse the entire floor with clean water with the addition of an alkaline detergent such as ULTRA STRIPPER, let dry.
Be careful when using SUPER CRYSTAL dust, as it could "burn" the marble. Do not over-insist with machine on same portion of surface for long periods of time.
The floor machine must be no more than 227 rpm, as ns. Phoenix (EH) and 30-45 kg weight and must be equipped with natural fiber disc.
We recommend proceeding step by step for crystallization by treating 1-2 m2 at the same time;
Before use, carefully read the recommendations on the label and make a preliminary test.
Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.
Puede iniciar sesión introduciendo su email y contraseña. Si ya tiene un usuario en nuestra antigua web, haga clic en recuperar contraseña y continúe el proceso para poder acceder a nuestra nueva tienda.