EXTRA STRONG TRANSPARENT ADHESIVE BELCARE ADHEX+ COBALT

Highly resistant transparent adhesive for making solid and invisible joints, in any type of material.

Quick drying with extra strong strength, very light color and good color
Easy to remove and extend

Ideal for bonding and laminating marble, granite and quartz.

It maintains a thick consistency, even after adding the hardener
Recommended for indoor use

Features

APPLICATION:

It acquires excellent adhesion in a short time (25-30 min), allowing you to work with the stone in a very fast time and at low temperatures.

Make sure the stone to be treated is dry, clean and dust-free.
Remove the required amount of glue from the container and add the catalyst in 1-2% paste by weight.
Stir well and use the product thus obtained. Do not return unused glue to the can.

If necessary to correct the colour, use dye paste or metal oxides.
Add the colour before the catalyst, match the tone, and then add the catalyst. Excess colour can influence the final characteristic of the glue.

After curing, the glue has a flat, high gloss surface and accepts the possibility of polishing. After the addition of the peroxide, the mastic changes colour and after a few minutes it returns to the initial white colour. This phenomenon is due to the special chemical composition of the resin and can be used as a catalyst indicator. To obtain a white colour, after curing, it is advisable to use a quantity of peroxide in the paste of not more than 1%. Glue contains UV absorbent.

Close the container after use. Keep the glue and the catalyst, in their original packaging, away from the sun.