Become a distributor
37.51
PROTECTOR HIDRO-OLEOFUGANTE LADRILLO CEMENTO BELLINZONI AQ PROOF
AQPROOF

WATERPROOFING PROTECTOR FOR BRICK-CEMENT UNPOLISHED SURFACES AQ PROOF

Water and oil stain protector, water-based and natural effect.

Limestone, renisca, brick, concrete, stone-Laminate boardd unpolished

  • Water, oil, grease, moisture, efflorescence, prevents mold
  • Reduces dirt
  • Transparent
  • Direct application
  • It does not create film: It catalyzes for a very effective protection
  • Inside and outside: Resistant UV rays

Features

Maintenance

To keep the material under slippage, we need to use our LEM3 Neutral Concentrated Cleaner. In case of stone wear and as required, re-application of the product is recommended.

Usage Tips:

  • It is advisable to apply the product to the full saturation of the stone.
  • On highly absorbent materials it is advisable to apply AQ PROOF twice, distancing the first application from the second 15 minutes.
  • Do not dilute the product with other solvents or water, AQ PROOF is ready for use.
  • Use of the product in polished marbles is not recommended and acid-sensitive materials.
  • The material to be treated must be completely dry.
  • Another application system, suitable for small parts, can be by immersion; it is also possible to use a sponge soaked in product and to plug the material.
  • Once treated, the lapid material must be allowed to dry for 24 hours for complete polymerization to occur. Walkable after 3/5 hours.
  • In the case of use on statues, vessels or exterior decoration items, pay close attention to the intersticios.
  • Before use, carefully read the recommendations on the label and make a preliminary test.
  • It does not alter the colour for the most part.

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.

Application surface: Marbles and granites, marble/cement, marble/resin, calcareous stones.

Usage Tool:

pincel.png

Brush

rodillo.png

Roller

trapo.png

Cloth

vellon.png

Spreader fleece

mopa.png

Mop

Product Performance: For the protection of granites with one liter of product 15/25 m2 can be treated, depending on the type and degree of finish of the material. In case of limestone, sandstone, marble / concrete with a liter can be treated 10-15 m2.

More Information
Ficha Técnica
Characteristic odour
Air drying at 20°C 45 - 60
Minutes Specific weight at 20°C 1.00 ± 0.02
Full time Drying 24 hours
Solubility in water soluble
pH 5.7 ± 0.2
Storage at 20° C 24 months in construction
Original Presentation Liquid
Light Yellow Colour

Downloads about product

Download features and technical details about our product