WATER REPELLENT PROTECTOR BLACK SURFACES INTENSIFIER IDEA BLACK

Optimal for reviving black polished granites, which do not catch colour with other products. 

Mode of use:

• Surface preparation: The surface must be dried and cleaned; stains, fungi and various inlays must be completely removed with the special cleaner belcare, otherwise they will be encapsulated and protected by the resin film and its successive extraction would be difficult. Applicable with: Brush, roller, spray. Brush application is advisable, where possible, as it allows for better penetration of the guard, exerting a slight pressure to make it penetrate well into cracks, angles and cavities.
• It is possible to apply the guard using a spray gun, spraying 20-25 cm from the surface and taking care to plug possible holes. Allow the product to dry for 12/24 hours, when dry remove excess by rubbing the surface with a cloth.
• During application and drying, the substrate temperature should be between 10 and 30°C.
• In case of application on floor with radiant wire heating, switch off the heating and let the stone cool down completely.

Usage Tips:

• Do not dilute the product with other solvents or water, as preparation is ready for use.
• The material to be treated must be completely dry.
• Once treated, the lapideo material has to be allowed to dry for 7 days for complete polymerization to occur.
• Before use, carefully read the recommendations on the label and make a preliminary test.

Application surface (black): Marbles and granites, marble/cement, marble/resin, black calcareous stones.

Usage Tools: 

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.