HYDRO-OLEOPHOBIC PROTECTOR NATURAL EFFECT IDEA HP

FOOD SAFE: Suitable for placing food on the treated surface.

Mode of use:

• Preparation of the support: The surface must be dried and cleaned; possibly stains, fungi and various inlays must be completely removed, otherwise they will be encapsulated and protected by the resin film and its successive extraction would be difficult.
• Applicable with: Brush, roller, spray. It is advisable, where possible, to apply with a brush as soon as it allows better penetration of the protector. For use apply IDEA HP with brush, exerting a slight pressure to make it penetrate well into cracks, angles and cavities. It is possible to apply the guard using a spray gun, spraying 20-25 cm from the surface and taking care to plug possible holes.
• Allow the product to air dry and the material will be protected. In the event that after application there are some leave, remove it using A wet CLOTH OF IDEA HP. During application and drying, the substrate temperature should be between 10 and 30°C.
• In case of underfloor application with underfloor heating, switch off the heating and let the stone cool down completely.

Usage Tips:

• It is advisable to apply the product until the complete saturation of the stone.
• On highly absorbent materials it is advisable to apply the product 2 times with a separation of 1 hours from the first application.
• Do not dilute the product with other solvents or water, as preparation is ready for use.
• The material to be treated must be completely dry.
• Another application system, suitable for small pieces, can be by immersion. It is also possible to use a wet sponge of the product and plug the material.
• Once treated, the lapideo material has to be allowed to dry for 24 hours for complete polymerization to occur.
• In the case of treatments on statues, vessels or exterior decoration items, make a lot of case to the intersticios.
• Before use, carefully read the recommendations on the label and make a preliminary test.

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.

Application surface: Marbles and granites, marble/cement, marble/resin, calcareous stones.

Usage Tool:

Product Performance: For the protection of marbles and bright or polished granites beyond the 800 grain, 30/40 m² can be treated with a lt. Of product. In the case of calcareous stones, sandstones, shiny marble/cement or polished beyond the grain 800, with a lt. 10/15 m² can be treated.

Maintenance: For the maintenance of the material we recommend the use of our detergent LEM-3. In case of stone wear and as required, reapplication of the product is recommended