HYDRO-OLEOPHOBIC PROTECTOR HIGHLY ABSORBENT MATERIALS IDEA RAPID COLOR

Mode of use:

• Surface preparation: The surface to be treated must be clean, dry; any stains, molds and fouling must be removed before application, as it would be difficult to remove them after application of the product.
• Apply IDEA RAPID COLOR without diluting, using a brush, roller, cloth. It is advisable, where possible, to apply the brush application, as it allows a better penetration of the protector; in this case apply IDEA RAPID COLOR by exerting a slight pressure on the brush, so that the product penetrates well in cracks, corners and holes.
• In external treatments, with ambient temperatures above 30°C, do not apply to hot material or exposed to the sun; wait for the coldest hours of the day.
• During application and drying, the substrate temperature should be between 10 and 30°C. In case of application on floor with underfloor heating, switch off the heating and let the stone cool down completely.

Usage Tips:

• It is advisable to apply the product up to a complete saturation of the stone.
• On highly absorbent materials, it is advisable to apply the product 2 times within one hour of the first application.
• Do not dilute the product with other solvents or water as soon as the preparation is ready for use.
• The material to be treated must be completely dry.
• Once treated, the lapid material should be allowed to dry for at least 24 hours in order for complete polymerization to take place.
• In the case of treatment of statues, vases or decoration items on the outside, pay close attention to the intersticios.
• Before use, carefully read the recommendations on the label and make a preliminary test.

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.

Application surface: Absorbent stones, limestone stones, sandstones and bricks.

Usage Tool:

Maintenance: Our LEM-3 Cleaner is recommended for material maintenance. In case of stone wear and as required, reapplication of the product is recommended.