ECO-FRIENDLY SNOW AND ICE MELTER ICE-MELT BELCARE

APPLICATION:

Ecological and hydroscopic thawing concentrate: When ice or snow melts and disappears, a thin layer of our product remains in the base that does not freeze. It therefore has a longer effect on anti-ice salt, preventing a new freeze.

It is also used to dry wet spaces as it absorbs moisture from the air.

The moisture absorption effect can also be used to remove dust from the pavement, for example in ships.

WINTER USE:

• Distribute evenly on the surface with protective gloves.
• The amount to be used is about 20gr/m2 for thin layers of ice. And a maximum of approximately 100gr/m2 for thicker layers. In order to reduce the consumption of the product, it is advised to remove the snow as much as possible with a blade.

MOISTURE REMOVAL:

• Place the product in one or more containers  and leave them in the room.
• Keep out of reach of children.
• Change the product in case of moisture saturation in the container.

Do not use in fresh (less than 7 weeks) or defective assembled cement.

TECHNICAL DATA:

• Apparent density: Approximately 860 g/lt, therefore: 1 kg corresponds to approximately 1.6kg of product
• Comparison: Normal ice salt has an apparent normal density of 1300gr/lt. 1 Kg of product corresponds to 0.rallt of anti-ice salt. 1 kg of product has a volume of almost 1.5.

BENEFITS:

• Great efficiency and effect assured, by the autonomous development of heat.
• More efficiency and economy in consumption compared to traditional anti-ice salt.
• Long lasting effect even at -5°C.