A2 BRONZE POLISHING AEROSOL FOR METALS AND POLISHED STONE-[Litres Capacity: 500 ml ]

Environmental spray to polish and protect all metal elements in the exterior, made of bronze or made of bronze alloys.

Decorative elements
Statues
Monuments

Getexcellent shineandcolorthe surface, without yellowing its color.

We take care of the environment:

This spraydoes not contain propellants harmful to the ozone layer.
Contains no resins or solvents

Features

Mode of use: The surface to be treated must be clean, dry and dust-free. Spray at 25 cm. Of the surface to be treated; if the stain is more intense, approach 5-10 cm. And spray more of the product, then dry with a soft cloth. In the case of particularly dirty bronzes, it is recommended first to remove the dust or pass a brush to remove some of the dirt and impurities.

Usage Tips: Do not use more than necessary because excess product could cause hard polishing.

Before use, carefully read the recommendations on the label and make a preliminary test.

Safety measures: In addition to good working practice, please refer to the CE safety data sheets and follow the regulation on laws that discipline workplace safety.

Application surface: Bronze, bronze alloys, metals in general and polished stone.

More Information

Ficha Técnica

Characteristic solvent odour
Specific weight at 20°C	0.57 ± 0.02
Solubility in water	Insoluble
pH	N.A.
Storage at 20° C	24 months in original packaging
Presentation
Aerosol Clear colour